RANCANG BANGUN CNC PLASMA CUTTING


Rusiyanto, - (2021) RANCANG BANGUN CNC PLASMA CUTTING. Rekayasa Mesin, 12 (1). pp. 1-10. ISSN 2338-1663

[thumbnail of 3. Rancang Bangun CNC Plasma Cutting - KUSDIYANTO UNNES.pdf] PDF
Download (539kB)

Abstract

This study aims to determine the frame safety factor and the precision level of CNC plasma cutting results. The research method used is a research and development model, namely the French model. This model has 8 steps that are used to produce a cnc plasma cut design. The data analysis technique used is descriptive statistical analysis techniques derived from the results of tests conducted. Safety factor testing was conducted using the 2015 Autodek Inventor software with a frame of 110.54 N. The precision cutting results were carried out three times using the same instrument, 20 currents with a speed of 400 mm / min, against ST 37 material with a thickness of 1.3 mm . The results showed that the frame was categorized as safe because the minimum safety factor value was 4.23 ul and the cut test results showed an average measurement with a maximum deviation of 0.3 mm, so it could be concluded that plasma CNC cutting had tolerance. rate of ± 0.3 mm.

Item Type: Article
Uncontrolled Keywords: CNC Plasma Cutting, Safety Factor, Precision
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Fakultas: Fakultas Teknik > Pendidikan Teknik Mesin, S1
Depositing User: dina nurcahyani perpus
Date Deposited: 12 Jan 2022 03:58
Last Modified: 12 Jan 2022 03:58
URI: http://lib.unnes.ac.id/id/eprint/48330

Actions (login required)

View Item View Item