N Khoiri, - and W N Jannah, - and C Huda, - and R M Maulana, - and P Marwoto, - and Masturi, FMIPA Pendidikan Fisika (2018) Leaves Waste Composite with Glass Fiber Reinforcement. In: International Conference on Advanced Materials for Better Future 2017, Surakarta.

Preview	PDF - Published Version Download (885kB) | Preview
Preview	PDF - Published Version Download (1MB) | Preview

Abstract

A research has been made to fabricate leave waste composites and Polyvinyl Acetate (PvAc) polymers reinforced with glass fibers. The method used was a simple mixing of leaves powders, PvAc, and glass fibers varied from 0 g to 1 g. Mass of 16 g leaves powder and mass of PvAc 4 g. The mixing result is suppressed by 5 metric-tons for 15 minutes. The composite is dried at room temperature for 1 day then in the oven at 100ºC for 1 hour. The compressive strength is measured bu a hydraulic press. The result show that the compressive strength increased to the highest point of 0.8 g and will decrease significantly when the addition of glass fiber mass of 1 g. The highest compressive strength reaches 52.6 MPa when the glass fiber mass is 0.8 g. The result of this research showed that leaves composites with Polyvinyl Acetate polymer reinforced with fiber glass can be used as alternative material of wood substitute

Actions (login required)

View Item